3B: Connecting The Video Components - Sony STR-DG910 Operating Instructions Manual

3b: Connecting the video components

How to connect your
components
This section describes how to connect your
video components to this receiver. Before you
begin, refer to "Component to be connected"
below for the pages which describe how to
connect each component.
After connecting all your components,
proceed to "4: Connecting the antennas" (page
31).
Component to be connected
Component
With HDMI jack
TV
DVD player/DVD recorder
Satellite tuner/Set-top box
VCR
Camcorder, video game, etc.
20 US
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
Page
21
23
25
Notes
• Connect image display components such as a TV
27
or a projector to the HDMI OUT or MONITOR
28
OUT jack on the receiver.
• Be sure to turn on the receiver when the video and
28
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
Converting video signals
This receiver is equipped with a function for
up-converting video signals. For details, see
page 29.
Digital Analog
High quality image