Sony STR-DG910 Operating Instructions Manual page 8

Name Function
Lights up when the receiver is
H DTS (-ES)/
decoding DTS signals.
(96/24)
"DTS-ES" lights up when the
receiver is decoding DTS-ES
signals.
"DTS 96/24" lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
"ANALOG" (page 78).
Lights up when category mode
I CAT
is set to "ONE CAT" during
XM Radio operation (page 73).
Lights up when a memory
J MEMORY
function, such as Preset
Memory (page 68), etc., is
activated.
Lights up when using the
K Tuner
receiver to tune in radio stations
indicators
(page 66), etc.
Lights up when using the
L Preset
receiver to tune in preset radio
station
stations. For details on
indicators
presetting radio stations, see
page 68.
M D.RANGE Lights up when dynamic range
compression is activated (page
46).
N NEO:6 Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 61).
Lights up when INPUT MODE
O COAX
is set to "AUTO IN" and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to "COAX
IN" (page 78).
Lights up when the receiver
P HDMI
recognizes a component
connected via a HDMI IN jack
(page 21).
8 US
Name Function
The letters (L, C, R, etc.)
Q Playback
indicate the channels being
channel
played back. The boxes around
indicators
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
L
Front Right
R
Center (monaural)
C
Surround Left
SL
Surround Right
SR
Surround (monaural or the
S
surround components obtained
by Pro Logic processing)
Surround Back Left
SBL
Surround Back Right
SBR
Surround Back (the surround
SB
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When surround
speakers are set to "NO" (page
48)
Sound Field: A.F.D. AUTO
SW
L C R
SL SR