3B: Connecting The Video Components - Sony STR-DG810 Operating Instructions Manual

3b: Connecting the video components

How to hook up your
components
This section describes how to hook up your
components to this receiver. Before you begin,
refer to "Component to be connected" below
for the pages which describe how to connect
each component.
After hooking up all your components,
proceed to "4: Connecting the antennas" (page
26).
Component to be connected
Component
With HDMI jack
TV monitor
DVD player/DVD recorder
Satellite tuner/Set-top box
VCR
Camcorder, video game, etc.
18
US
Page
19
21
22
24
25
25
Video input/output jack to be
connected
The image quality depends on the connecting
jack. Refer to the illustration that follows.
Select the connection according to the jacks on
your components.
TV, etc. INPUT
jack
HDMI
Receiver HDMI
OUT, MONITOR
HDMI
OUT jack
?/1
MASTER VOLUME
TONE MODE TUNING MODE DISPLAY INPUT MODE
TONE TUNING INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/ CATEGORY
ENTER MODE CATEGORY 2CH A.F.D. MOVIE MUSIC AUTO CAL DIRECT
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R
HDMI
Receiver INPUT
jack
Video component
OUTPUT jack
HDMI
Notes
• Connect image display components such as a TV
or a projector to the HDMI OUT or MONITOR
OUT jack on the receiver.
• Be sur to turn on the receiver when the video and
audio of a playback component are being output to
a TV through the receiver. If the power supply of
the receiver is not on, neither video nor audio is
transmitted.
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO
VIDEO
COMPONENT
VIDEO
VIDEO
High quality image