Select The Channel - Sony STR-DG910 Operating Instructions Manual

3
Press CATEGORY + or
CATEGORY – to select the
category you want.
The category is selected and the channel
with the lowest number in the specified
category is selected.
4
Press TUNING + or TUNING – to

select the channel.

You can also press TUNING MODE on
the receiver to select "AUTO T.", and
then turn TUNING +/– to select the
channel.
Notes
• When you select a channel in the "ONE CAT"
mode, the channel you selected may not be the one
in the category you want. This is because one
channel may belong to more than one category.
• If you press CATEGORY + or CATEGORY – in
the "ALL CAT" mode, the first channel of the next
or previous category is selected (CATEGORY
SKIP).
Selecting channels by inputting
the channel number directly
(DIRECT TUNING)
SAT TV
AUX DMPORT
2CH A.F.D.
CATEGORY
SLEEP
MODE
1 2
4 5
7 8
- / --
0/10
CLEAR
>10
1
Press TUNER repeatedly to
select "XM RADIO".
You can also use INPUT SELECTOR on
the receiver.
74 US
1
SA-CD/CD TUNER
RECEIVER
MOVIE MUSIC
D.TUNING AUTO CAL 2
3
3
6
9
4
ENTER
MEMORY
2
Press D.TUNING.
3
Press the numeric buttons to
enter the channel number.
4
Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
The selected channel is tune in.
Displaying the XM-RADIO
information on the front panel
display
?/1
TONE MODE TUNING MODE
TONE TUNING
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/ CATEGORY
ENTER MODE
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO L AUDIO R
Press DISPLAY on the receiver
repeatedly.
Each time you press DISPLAY while tuning in
the channel, the display changes cyclically as
follows;
Channel name t Channel number t
Category name t Artist name/Feature t
Song/Program title t Sound field type
Note
When the message consists of 9 characters or more,
the message scrolls across the display.
Tip
The preset number is always displayed at the right
end of the display.
DISPLAY
MASTER VOLUME
MULTI CHANNEL DECODING
DISPLAY INPUT MODE
INPUT SELECTOR
2CH A.F.D. MOVIE MUSIC
CATEGORY AUTO CAL DIRECT