How To Set Voip Rtp Port Setting; How To Set Tos Setting; How To Set T.38 Starting Port Setting - Draytek Vigor VigorAccess IVD Quick Start Manual

How to Set VoIP RTP Port Setting

- Help
IVD/voip/misc> rtp_port ?
- Display the setting
IVD/voip/misc> rtp_port -s
- Edit the rtp starting port
IVD/voip/misc> rtp_port <Port number>
Port number

How to Set ToS Setting

- Help
IVD/qos> tos ?
- Display the setting
IVD/qos> tos -s
- Edit the tos value for RTP, MGCP and SIP
IVD/voip> tos -v <RTP_Value> <MGCP_Value> <SIP_Value>
- Edit the tos value for SNMP
IVD/voip> tos -n <SNMP_Value>
Value

How to Set T.38 Starting Port Setting

- Help
IVD/voip/misc> t38port ?
- Display the setting
IVD/voip/misc> t38port -s
- Edit the T.38 starting port
IVD/voip/misc> t38port <port>
port
30
Assign a starting port number in RTP protocol packet.
1...65535. (Default is 13456)
Assign a TOS value in VoIP protocol packet.
Range: 00 ~ ff (by hex value) (Default is 0xa0)
Assign a starting port number in T.38 protocol packet.
1...65535 (Default is 49170)
Quick Start Guide for VigorAccess IVD
Version: 1.2