How to Check the Version Information
To display the basic information of the
controller inside the master device
1.
Login through terminal emulator software.
2.
Type the following command
- Admin >
To display the IVD module information inside
slave device
1.
Login the specified IVD slave module.
2.
Type the following command to get the DSL
module information
-
IVD>system basicinfo
To display the DSL module information inside
the IVD slave device
1.
Login the specified DSL module.
- IVD>dsl –c (Connect to dsl device via
serial port)
2.
Type the following command to get the
DSL module information
- $get system info
4
system basic
The results
You will get the following results:
-Admin> system basic
--------------------------------------------------------------------------------
SYSTEM BASIC INFORMATION
--------------------------------------------------------------------------------
Machine Model
: IVD MASTER
Firmware Version
: V3.1.17.16
Hardware Version
: 1.1 - 1 Fiber(s)
Build Time
: Fri Jul 21 09:47:32 CST 2006
System Uptime
: 3 days 17h:30m:38s
System Contact
: admin@urcompany.com
System Name
: IVD
System Location
: urlocation
CPU Usage
: 01%
Memory Usage
: 52%
Current Time
: Mon Jan 05 01:30:19 1970
The results
You will get the following results:
- IVD/system> basicInfo
---------------------------------------------------------------
SYSTEM BASIC INFORMATION
---------------------------------------------------------------
Machine Model
: IVD system
Firmware Version
: IVD_VOIP_V1.0.1.9
Hardware Version
: V1.0
Build Time
: Mon Jan 15 15:09:43 CST 2007
System Uptime
: 0 days 05h:49m:43s
System Contact
: admin@urcompany.com
System Name
: IVD
System Location
: urlocation
Memory Usage
: 41%
Current Time
: Thu Jan 01 05:49:43 1970
The results
You will get the following results:
$get system info
Description
: IP DSLAM
Name
: IPDSLAM
Location
:
Contact
:
Vendor
:
LogThreshold
: 0
Object-id
: 1.3.6.1.4.1.7367.2.11.1
Up Time(HH:MM:SS) : 140:49:31
HwVersion
: 1.2
Quick Start Guide for VigorAccess IVD
Version: 1.2