Admin/network> route -a <TargetIP>
<NetMask> <GatewayIP>
Admin/network> route -e <RtIdx>
<TargetIP> <NetMask> <GatewayIP>
Admin/network> route -d <RtIdx>
Admin/network> route -D
How to configure NTP and Time
Users can use the following commands to configure the NTP server IP , the polling interval, time zone and
the daylight saves time. Users can enable/disable NTP function, too.
Command
Admin> service
Admin/service> ntp –s
Admin/service> ntp ?
Admin/service> ntp now
Admin/service> ntp -e <IP_addr>
<interval>
Admin/service> ntp -t <MMDDhhmmYYYY>
Admin/service> ntp -z <time_zone> <DST>
Admin/service> ntp on/off
How to configure SNMP
Users can use the following commands to configure the SNMP settings, including SNMP community,
SNMP Trap port, and SNMP Trap host. After the following setting, EMS can communicate with IVD via
SNMP.
Command
Admin> service
Admin/service> snmp -l
Admin/service> snmp -s
Admin/service> snmp -c <CommRO>
<CommRW> <CommTrap>
Admin/service> snmp -a <HostIP>
Admin/service> snmp -e <EntryIdx>
<HostIP>
Admin/service> snmp -d <EntryIdx>
Admin/service> snmp –D
Quick Start Guide for VigorAccess
Add a static route entry
Edit the static route entry
Delete the static route entry
Delete all static route entries
Description
Enter service directory
Display the settings
Help
Display the current time
Edit the NTP server IP address and the polling
interval
Edit the year, month, date, hour, and minute.
Edit the time zone and the daylight saving time.
Turn on/off the NTP
Description
Enter service directory
Display the general SNMP settings
Display the SNMP Trap host entries
Edit the read-only, read-write, and trap community
Add a trap host
Edit the trap host
Delete the trap host entry
Delete all the trap host entries
Version: 1.2
9