How To Set G5 And G6 As Uplink Interface - Draytek Vigor VigorAccess IVD Quick Start Manual

How to Set G5 and G6 as UPLINK Interface

For the environment with available Fiber
connection, the UP-G1/UP-G2 connector in
Master device is used as the channel to access
Internet. For such condition, you can connect
slave devices from G1 to G6.
,
However for the environment without available
Fiber connection, G5 and/or G6 in Master device
can be used as the channel to access Internet. For
such condition, only G1 to G4 connectors can be
used for the slave devices.
For example,
-
Admin>system uplink G6 up
Enable the port by typing:
-
Admin>system link –m G6 on
Quick Start Guide for VigorAccess
Version: 1.2
7