How to Set DTMF Relay Setting
- Help
IVD/voip/sip> dtmf_relay ?
- Display the setting
IVD/voip/sip> dtmf_relay -s
- Edit dtmf relay mode for the port#
IVD/voip/sip> dtmf_relay <Port> <Mode>
- Edit dtmf relay mode and SIP INFO mode for the port#
IVD/voip/sip> dtmf_relay <Port> <Mode> <SipInfoMode>
Port
Mode
SipInfoMode
How to Set Fax Transport Mode Setting
- Help
IVD/voip/sip> fax ?
- Display the setting
IVD/voip/sip> fax -s
- Edit fax mode for the port#
IVD/voip/sip> fax <Port> <Mode>
Port
Mode
Quick Start Guide for VigorAccess
Device port number (1~24)
0: Disable
1: RFC2833 (Default is 1)
2: SIP INFO
Click one option to be applied in DTMF function. There are three options to be
supported as below –
Disable(Inband)
RFC2833
SIP INFO
0: CISCO
1: NORTEL
(If Mode is 1, default is none)
(If Mode is 2, default is 0)
Device port number (1~24)
Select a mode to be applied on FAX function. There are two options to be
supported as below –
Transparent : FAX will be transmitted via voice channel, no fax relay nor
Codec change will be involved.
T.38 Relay : Using T.38 Fax Relay. It is the default value.
0: Transparent
1: T.38 Relay (Default is 1)
Version: 1.2
23