Table of Contents
Advertisement
Operation
Busy Channel Lockout
If the channel is already in use, you can prevent the UHF CB Radio from transmitting.
This is particularly important when using CTCSS/DCS.
1. Press [MENU] and then use [UP / DOWN] to highlight 09 BCL.
2. Press [MENU] to select.
3. Press [UP / DOWN] to select a On or Off.
4. Press and hold [MENU] to save & exit from the menu mode.
If a button is not pressed within 10 seconds the XTRAK will automatically
exit the Menu Mode.
NOTE
Roger Beep
Roger Beep adds a confirmation chirp to the end of a transmission when the PTT key
is released.
1. Press [MENU] and then use [UP / DOWN] to highlight 10 Roger Beep.
2. Press [MENU] to select.
3. Press [UP / DOWN] to select a On or Off.
4. Press and hold [MENU] to save & exit from the menu mode.
If a button is not pressed within 10 seconds the XTRAK will automatically
exit the Menu Mode.
NOTE
UNIDEN XTRAK
26
UHF CB Transceiver
Advertisement
Table of Contents
