Uniden XTRAK 80 Series Owner's Manual page 32

Operation - Special Features
4. Press [REPLAY] to move to Alpha Tag selection. A cursor flashes in the 1st alpha
position. If you do not wish to name the channel then move on to step 5.
i). Press [UP / DOWN] to select the desired alpha character.
ii). Use [TRI /S] or [SQL /S] to shift between cursor positions.
5. When finished, press [REPLAY]. The RX channel flashes.
If you wish to select another RX channel to edit, use [UP / DOWN].
6. Press and hold [MENU] to exit programming mode.
A long confirmation tone sounds to indicate the new channel is programmed.
To delete an extra RX channel, edit the channel frequency to 000.0000
and exit programming mode.
NOTE
Managing the 100 RX only channels can also be done within the XTRAK
App (XTRAK 80 PRO only).
NOTE
UNIDEN XTRAK
32
UHF CB Transceiver