Selecting The Call Tone; Busy Channel Lockout - Uniden X86 Owner's Manual

Operation

Selecting the Call tone

1. Press [MENU] and scroll down using the
Number 5 - Call Tone
2. Press [MENU] again to enter into the Call Tone menu.
3. Press /
3. Press the [MENU] button to save & move down in the menu mode.
If a button is not pressed within 5 seconds the UHF CB
Radio will automatically save the selected option and exit
the Menu Mode.
NOTE

Busy Channel Lockout

If the channel is already in use, you can prevent the UHF CB Radio
from transmitting . This is particularly important when using CTCSS/DCS.
1. Press [MENU] and scroll down using the
Number 6 - BCL.
2. Press [MENU] again to enter into the BCL option.
2. Press /
3. Press the [MENU] button to save & move down in the menu mode.
When the function is enabled, the "BCL" icon will display on screen.
If a button is not pressed within 5 seconds the UHF CB
Radio will automatically save the selected option and exit
the Menu Mode.
NOTE
UNIDEN X86
to select the desired Call Tone from 1 to 5.
to change the setting between ON or OFF.
key and select option
key and select option
21
UHF CB Transceiver