Speaker Select; Key Backlight / Display Dimmer - Uniden XTRAK 80 Series Owner's Manual

Remote speaker mic uhf cb transceiver
Table of Contents

Advertisement

Operation

Speaker Select

Use this to set which speaker/s to enable.
Base Only
Remote Only
Dual Speaker
1. Press [MENU] and then use [UP / DOWN] to highlight 13 Speaker Select.
2. Press [MENU] to select.
3. Press [UP / DOWN] to select an option.
4. Press and hold [MENU] to save & exit from the menu mode.
When an optional External Speaker is connected to the Ext.Sp. jack of
the base, it substitutes for the Base speaker, which becomes muted.
NOTE
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE

Key Backlight / Display Dimmer

1. Press [MENU], then use [UP / DOWN] to highlight 14 B.Light/Dimmer.
2. Press [MENU] to select.
3. Press [UP / DOWN] to select between Off, Low, Mid or High.
4. Press and hold [MENU] to save & exit from the menu mode.
If a button is not pressed within 10 seconds the UHF CB Radio will
automatically exit the Menu Mode.
NOTE
UNIDEN XTRAK
28
UHF CB Transceiver

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xtrak80proRm-x809322402015538

Table of Contents