Instant Channel; Setting The Instant Priority Channel (Ch1 Or Ch2); Recalling The Instant Channel - Uniden XTRAK 80 Series Owner's Manual

Operation

Instant Channel

You can set two channels as Instant Priority Channels (CH1 and CH2), which can be
recalled at the press of a button. These two channels are also monitored, along with
the current channel, when Triple Watch mode is enabled.

Setting the Instant Priority Channel (CH1 or CH2)

By default Instant Priority CH1 is preset to the emergency channel, CH05.
By default Instant Priority CH2 is preset to the emergency channel, CH35.
1. Press [MENU].
2. Press [UP / DOWN] key until 04 Pri/Inst CH1 or 05 Pri/Inst CH2 is highlighted.
3. Press [MENU] to select. The current CH1 or CH2 channel setting displays.
4. Press [UP / DOWN] to select a desired channel.
5. Press and hold [MENU] to save and exit.
If you only wish to have one Instant Priority Channel, then set Instant
Priority CH2 to Off.
NOTE

Recalling the Instant Channel

When the [INST/S] SMART key is set to INST;
1. Press [INST/S] to recall the Instant Priority CH1.
2. Press [INST/S] again to recall the Instant Priority CH2 (if CH2 has been set)
3. Press [INST/S] again to return to the previous channel.
The INST icon displays when showing Instant Priority CH1 or CH2.
UNIDEN XTRAK
17
UHF CB Transceiver