Operation
Priority Watch for Group Scan
To switch Priority Watch On/Off;
1. Press [MENU] and then press [UP / DOWN] to highlight 03 Priority Watch.
2. Press [MENU] to select the option.
3. Press [UP / DOWN] to highlight On or Off.
4. Press and hold [MENU] to store the setting.
If SCAN is deactivated while it is tuned to an active channel, the XTRAK
will stay on that active channel. If none of the channels are active, the
NOTE
XTRAK will reinstate the scan start channel.
If OS/GS Scanning is initiated when there are no channels programmed
in OS/GS memory, an error tone will be heard and scanning will not start
NOTE
(see Add/Remove Channels from SCAN Memory, p.23).
Add/Remove Channels from SCAN Memory
Select OS/GS Scanning Mode. Select the channel you want to store.
Press and hold [MEM]. The MEM icon appears and two beep tones sound.
To remove the channel from SCAN memory, press and hold [MEM] once more.
The MEM icon disappears.
UNIDEN XTRAK
23
UHF CB Transceiver