Group Scan (Gs) Mode - Uniden X86 Owner's Manual

Operation

Group Scan (GS) Mode

Allows scanning of channels added into the Group Scan memory.
By default, the GS scan memory is empty and channels need to be added
before GS scan can be activated.
See Add/Remove Channels from GS Scan Memory, p.20.
Includes the accessory feature Priority Watch
which allows you to monitor the Instant Priority
Channel while scanning (see p.15 for setting
Instant Priority Channel and p.20 to turn on
Priority Watch).
To use GS Mode Scanning, press [OS/GS]. It
will change the scan mode from OS to GS. Then,
Press [SCAN] to start scanning in GS.
GS Scanning checks the Instant Priority Channel for activity regularly
when Priority Watch is ON.
If the Priority Channel becomes active the radio will stay on that channel
for as long as the signal is present. If the received signal ceases, Priority
Scanning continues after 3 seconds.
If scanning stops on a channel which is not a Priority Channel, UHF CB
Radio will continue monitoring the Priority Channel for activity
along with listening to the active one.
To deactivate SCAN, press [SCAN].
UNIDEN X86
19
CALL TRIPLE MEM LOCK
DUP
MON
MIC
UHF CB Transceiver