Operation
Enabling the Instant Priority Channel
1. Press [MENU] one time, first option appears
is the priority watch.
2. Press [MENU] again to enter inside the
priority watch option.
3. Use
/
4. Press [MENU] to save & move to next option.
Recalling the Instant Channel
Press the [INST] button on the microphone to
jump on to the set priority channels P1 & P2
(refer Pg 20) anytime. Press [INST] again to exit.
EMG (Emergency Button)
Press [EMG] to toggle between the current channel and the emergency
channels 05 and 35.
In EMG mode CH 05 and CH35 flash, and the EM icon displays.
When in EMG CH05 or EMG CH35 mode, the
[INST], [DCS/CTCSS] and [SCAN] buttons are disabled.
Press [EMG] again to exit EMG mode and return to the
NOTE
current channel.
Call Function
Press and hold [EMG] Button. A three second ringing tone will be
transmitted.
You may select from 5 types of tones (see p.21).
Current regulations require calling tones to be restricted to
one transmission per minute. If a second transmission is
attempted within one minute then an error tone will sound.
NOTE
UNIDEN X86
to select On/OFF.
15
INST
CALL
TRIPLE
MEM
LOCK
DUP
MON
MIC
EMG/CALL
/
,
UHF CB Transceiver