Turning Off All Connected Equipment (System Standby); Programming The Remote Control - Sony STR-DA5700ES Operating Instructions Manual

Equipment TV VCR DVD player,
Button
TOP MENU, POP
UP/MENU
z
AUDIO
z
SUBTITLE
a)
LD player only
b)
Deck B only
c)
DVD only
d)
Video CD only
Turning off all connected
equipment
(SYSTEM STANDBY)
Even when this receiver is standby mode,
zone 2 or zone 3 remain turned on. To turn off
all Sony equipment, including connections to
each zone, press ?/1 and AV ?/1 on the
remote control at the same time.
128
US
Blu-ray
DVD/VCR Disc
combo Player
z z
z z z
z z
AV ?/1
?/1
HDD PSX Video CD
Recorder player, LD
player
z
z z
z z
Programming the remote
control
You can customize the remote control to match
the equipment connected to your receiver. You
can even program the remote control to
operate non-Sony equipment and also Sony
equipment that the remote control is normally
unable to operate.
The procedure below uses as an example a
case in which a VCR made by a company other
than Sony is connected to the VIDEO 1 IN
jacks on the receiver.
RM SET
UP
SHIFT
Numeric
buttons
1
Press AV ?/1 while pressing RM
SET UP.
The RM SET UP button flashes.
Digital DSS Tape
CATV deck A/B
terminal
z
DAT CD
deck player,
MD deck
AV ?/1
Input
buttons
ENT/
MEM