Zone Setup; Line Out; V Trigger - Sony STR-DA5700ES Operating Instructions Manual

2
Select "Volume," then press
3
Adjust the volume, then press

Zone Setup

To preset the volume for main
zone/zone 2
You can preset the volume of turning the
power on for each zone.
1
Select the zone for which you want to
preset the volume, then press
2
Select "Preset Volume," then press
3
Adjust the volume, then press
During the adjustment, the sound is output
at the volume level to which you have
adjusted it, regardless of the value of
MASTER VOLUME control.
If you select "Off," each zone is activated at
the same volume as that in effect when you
turned the power off last time.
Note
• You cannot preset the volume in the following
cases.
– The SURROUND BACK (ZONE 2) terminals
are used for the surround back speakers or the
front high speakers, or are used with a bi-
amplifier connection.
– "Line Out" is set to "Fixed."

Line Out

You can set the volume control for the ZONE
2 AUDIO OUT jacks to "Variable" or "Fixed."
For details, see "Set the volume control for
zone 2" (page 81)
x Fixed
x Variable

12V Trigger

Lets you select various options for use of the
12V Trigger function.
. x Off
Lets you turn off output of 12V triggers even
.
when the main receiver is turned on.
x Ctrl
Lets you turn the output of 12V triggers on or
off manually using the control command of an
external control device.
x Zone
Lets you turn the output of 12V triggers on or
off based on whether the selected zone is
turned on or off.
.
x Input (for "Main" only)
.
Lets you turn on the output of 12V triggers
.
when the preset input is selected.
When you select "Input," the setting display
which sets each input trigger to on/off appears.
Press V/v to select the input, then press
check the box.
x HDMI A (for "Main" only)
Lets you turn the output of 12V triggers on or
off based on the output setting of the HDMI
OUT A jack.
x HDMI B (for "Main" only)
Lets you turn the output of 12V triggers on or
off based on the output setting of the HDMI
OUT B jack.
x Main (for "Zone2" and "Zone3"
only)
Lets you link operation of trigger in zone 2 or
zone 3 to the TRIGGER OUT MAIN jack.
to
117 US