Turning Off All Connected Equipment (System Standby); Programming The Remote Control - Sony STR-DA5800ES Operating Instructions Manual

a)
LD player only
b)
Deck B only
c)
DVD only
Turning off all connected
equipment
(SYSTEM STANDBY)
Even when this receiver is standby mode,
zone 2 or zone 3 remain turned on. To turn off
all Sony equipment, including connections to
each zone, press ?/1 and AV ?/1 on the
remote control at the same time.
Programming the remote
control
You can customize the remote control to match
the equipment connected to your receiver. You
can even program the remote control to
operate non-Sony equipment and also Sony
equipment that the remote control is normally
unable to operate.
The procedure below uses as an example a
AV ?/1
case in which a VCR made by a company other
than Sony is connected to the VIDEO 1 IN
?/1
jacks on the receiver.
RM SET
UP
SHIFT
Numeric
buttons
1
Press AV ?/1 while pressing RM
SET UP.
The RM SET UP button flashes.
AV ?/1
Input
buttons
ENT/
MEM
continued
123 GB