Using Other Features; Using "Bravia" Sync Features - Sony STR-DA5700ES Operating Instructions Manual

Using Other Features

Using "BRAVIA" Sync
features
What is "BRAVIA" Sync?
"BRAVIA" Sync is the name of a function on
Sony products that enables compatible
equipment connected via HDMI cables to be
operated mutually using the "BRAVIA"
remote control.
This mutual operation is enabled by the
Control for HDMI function using HDMI CEC
(Consumer Electronics Control) standardized
for HDMI (High-Definition Multimedia
Interface).
By connecting Sony equipment that are
compatible with the "BRAVIA" Sync with an
HDMI cable (not supplied), operation is
simplified as below:
• System Power-Off (page 85)
• One-Touch Play (page 85)
• System Audio Control (page 85)
• Audio Return Channel (ARC) (page 86)
• Scene Select (page 86)
• Home Theater Control (page 86)
The Control for HDMI function
does not work in the following
cases:
• When you connect the receiver to an
equipment which is not correspond with
Sony Control for HDMI function.
• When you connect the receiver and
equipment using other than HDMI
connection.
• The Control for HDMI function does not
work on an equipment connected to the
HDMI OUT B jack of the receiver.
We recommend that you connect the receiver
to products featuring "BRAVIA" Sync.
84
US
Notes
• The following features may operate with non-Sony
equipment. However, compatibility with all non-
Sony equipment is not guaranteed.
– System Power-Off
– One-Touch Play
– System Audio Control
• The following features are Sony proprietary
functions. They can not operate with non-Sony
equipment.
– Scene Select
– Home Theater Control
• Equipment not compatible with "BRAVIA" Sync
can not activate these features.
Preparing for the "BRAVIA"
Sync
To use the "BRAVIA" Sync, turn the Control
for HDMI function on for both the receiver
and the connected equipment.
Turn the Control for HDMI function of the
receiver and the connected equipment on
individually.
1
Select "Settings" from the
home menu, then press
2
Select "HDMI Settings," then
press .
3
Select "Control for HDMI," then
press .
4
Select "On," then press
The Control for HDMI function of the
receiver is activated.
5
Turn the Control for HDMI
function of the connected
equipment on.
For details on setting the connected
equipment, refer to its operating
instructions.
.
.