Bluetooth Operation; Usb/Ipod/Iphone Playback; Clock With Alarm - Jensen JWM6A Quick Reference Manual

MODE/DISPLAY: Press
repeatedly until you reach
BLUETOOTH mode.
ANSWERING PHONE:
BT audio will automatically
pause when a call is answered.
It will then resume once call has
ended. In some cases, it may
be necessary to press the play
button to resume the BT audio.
PLAY/PAUSE: Press to PLAY or
PAUSE current audio or video.
MODE/DISPLAY: Press
repeatedly until you reach
USB/iPod/iPhone mode.
1: Press to hear brief 10 sec. intro
of every song. Press again to disable.
2: Press to SHUFFLE tracks.
Press again for SEQUENTIAL play.
3: Press to REPEAT USB track(s)
(one, DIR, all, or release function)
or iPod/iPhone track(s) (one, all,
or release function).
4: Press once to SUSPEND
playback and twice to RESET
device back to first track.
5: Press to go to next folder
(USB only).
6: Press to go to previous folder (USB only).
1. MODE/DISPLAY:
Press & hold for 2 seconds
to access clock mode.
For owner's manual, please visit
©Copyright 2015 ASA, LLC
AUDIO/MENU: Press & hold to navigate through menu options, until BT
menu options is reached. Press ENTER to select DEVICE LIST or PAIR.
http://www.asaelectronics.com/manuals-guides
AS/PS: In iPod/iPhone mode,
reverse through playlist selection.
TUNE/SEEK/TRACK: Advance or
reverse tracks on your device.
ENTER/SEARCH: Press & hold
to have unit start searching for
a Bluetooth-enabled device to
pair with. The device will display
' J WM6A' when BT function on unit
has found device. Select ' J WM6A'
on your device, enter pairing pass-
word 0000, if requested, and the
unit will display "PAIR OK" followed
by "CONN OK".
Press >> |
TUNE/SEEK/TRACK:
button to advance to NEXT TRACK.
Press | << button to advance to
PREVIOUS TRACK. Press & hold
additional times to step through x2, x4,
x8, x20. Press PLAY ( > ||) to resume.
ENTER/SEARCH: Press to confirm
menu selection. Press & hold to
navigate through playlists (iPod/
iPhone only).
USB: Connect a USB flash/thumb
drive or iPod/iPhone for audio
playback and/or charging.
Press | << to adjust hours
3. TIME SET:
and >> | to adjust minutes when setting
either CLOCK or ALARM time. Press
4. ENTER SEARCH to save new time
2. ALARM ON/OFF:
Press and
hold for 2 seconds Clock on LCD
screen will flash.
ALARM SET:
Press to enter
sleep timer: 15, 30, 45, 60, 0
minutes. Press & hold to enter
ALARM SET mode.
or scan this QR code.
QRG-JWM6A-0315