Settings In Ibapda-V6 - IBA ibaPADU-8 Manual

ibaPADU-8/ -16/ -32/ -32-R
9.2.1

Settings in ibaPDA-V6

9.2.1.1 I/O-Manager, hardware
The devices are connected via ibaFOB-io card, ibaFOB-4i card or ibaCom-PCMCIA-F
to the PC. In the I/O-manager dialog, section "Hardware", you should add an
ibaPADU-8, -16 or -32 module to the corresponding FOB-F-PCI... data interface.
Figure 13: I/O-Manager, hardware
9.2.1.2 ibaPDA diagnostics, check of settings
The correct function of the ibaFOB and/or ibaPADU may be checked already in the
I/O-manager. The interface card is automatically detected by the ibaPDA system. By
means of the automatic detection function (Autodetect) the system detects the periph-
eral devices connected to the system at this time.
Manual
Issue 3.3
25