Product Properties; Properties - IBA ibaPADU-8 Manual

8

Product properties

8.1

Properties

 Power supply (depending on the type DC 18 V/32 V or AC 115 V/250 V)
 Rugged mechanical and electrically shielded metal case (with DIN-rail mount or 19"
rack mount)
 3 LEDs (Run, Link, Error)
 1 fiber optic input and 1 output to transmit the signals and for daisy chaining multi-
ple devices
 8, 16 or 32 analog inputs, 14 bits, galvanically isolated against each other and
against digital ground
 8, 16 or 32 digital inputs, galvanically isolated against each other and against digital
ground (with eight status LEDs on ibaPADU-8)
 Standard sampling rate for ibaPADU-8, -16 and -32 is 1000 Hz
 Sampling rate for ibaPADU-16 / -32 of version A2 or higher can be set to 800 Hz or
960 Hz; this contributes to operation in a 60 Hz-mains environment
 For ibaPADU-8 only, in externally synchronized operation mode and together with
ibaFOB-io or ibaFOB-4i + ibaFOB-4o in ring topology: sampling rate can be
changed by program (ibaLogic) in steps of 100 μs between 1.0 ms and 9.9 ms
 ibaPADU-8, -16 and -32 are operating in the so called F-Mode, using a data trans-
mission rate of 3.3 Mbit/s for fiber optic communication
 ibaPADU-16 and -32 can use an emulation mode for the 2.2 Mbit/s data transmis-
sion rate in order to work together with old ibaPADU models
 Service port for (later) firmware updates
 Shield connector(-s)
 Parallel measuring via fiber optical output or RJ11 jack and ibaCom-PCMCIA-F
card is supported for all devices.
14
Manual
Issue 3.3
ibaPADU-8/ -16/ -32/ -32-R