Installation - Tripp Lite B024-DPU08 Quick Start Manual

Installation

Rack Mounting – Front
Note: Unless otherwise specified, rack screws mentioned in the following steps are user-supplied. If you need additional screws,
contact your rack dealer.
1
Remove the screws, one each from the left and right sides near the front of the unit.
2
Use the M3 x 6 Phillips hex head screws supplied with the rack-mounting kit to attach the rack mounting brackets to
the sides near the front of the unit.
3
Place the KVM switch in the rack. Position it so the holes in the mounting brackets line up with the holes in the rack.
Secure the mounting brackets to the front of the rack.
4