Yamaha RHINO YXR66FSEW Owner's Manual page 128

1. Locknut
2. Spring preload adjusting ring
3. Special wrench
1. Contre-écrou
2. Bague de réglage de la précontrainte de ressort
3. Clé spéciale
1. Contratuerca
2. Aro de ajuste de la precarga del muelle
3. Llave especial
Spring preload
1. Loosen the locknut.
2. Turn the adjusting ring in direction a to in-
crease the spring preload and thereby hard-
en the suspension, and in direction b to
decrease the spring preload and thereby soft-
en the suspension.
NOTE:
G
A special wrench can be obtained at a Yama-
ha dealer to make this adjustment.
G
The spring preload setting is determined by
measuring distance A, shown in the illustra-
tion. The shorter distance A is, the lower the
spring preload; the longer distance A is, the
higher the spring preload. With each com-
plete turn of the adjusting nut, distance A is
changed by 1.5 mm (0.06 in).
4-61