Siemens ET 200S 1SI Function Manual page 33

Schematic LAD representation
Parameter description
Table 3-6 Parameter _ET200S_SIxx_flowRts
Name P type
1)
execute IN BOOL
reset IN BOOL
waitForCts IN DINT
periIn IN ARRAY [0..3] of BYTE /
ARRAY [0..7] of BYTE /
ARRAY [0..31] of BYTE
periOut IN/OUT ARRAY [0..3] of BYTE /
ARRAY [0..7] of BYTE /
ARRAY [0..31] of BYTE
done OUT BOOL
Supplement to the ET 200S 1SI serial interface module
Function Manual, 01/2015, xxx
Data type
Initiates request on positive edge
Aborts request
Delay time for CTS=ON
Value range:
20 ms ≤ waitForXon ≤ 655350 ms
Transfers I/O inputs of the serial in‐
terface module to FB
Prepared data of the FB for the I/O
outputs of the serial interface mod‐
ule
2)
Request completed without errors
Function blocks of the ET 200S 1SI serial interface module
3.7 Function blocks _ET200S_SIxx_flowRts
Meaning Actions performed by Actions per‐
user formed by
Entered Checked
Entered Checked
Entered Checked
I/O variable of the I/O Checked
inputs of the serial
module transferred to
the FB
Checked and en‐ Entered
tered on the I/O vari‐
able for the I/O out‐
puts
Checked Entered
block
33