Siemens ET 200S 1SI Function Manual page 35

Call (LAD representation)
Parameter description
Table 3-7 Parameter _ET200S_SIxx_flowV24
Name P type
1)
execute IN
reset IN
timeRtsOff IN
maxWaitTime IN
periIn IN
periOut IN/OUT ARRAY [0..3] of BYTE /
done OUT
Supplement to the ET 200S 1SI serial interface module
Function Manual, 01/2015, xxx
Data type
BOOL
BOOL
DINT
DINT
ARRAY [0..3] of BYTE /
ARRAY [0..7] of BYTE /
ARRAY [0..31] of BYTE
ARRAY [0..7] of BYTE /
ARRAY [0..31] of BYTE
BOOL
Function blocks of the ET 200S 1SI serial interface module
3.8 Function blocks _ET200S_SIxx_flowV24
Meaning
Initiates request on positive edge Entered
Aborts request
Time that must elapse after the
transfer before RTS is disabled
Value range:
0 ≤ timeRtsOff ≤ 655350 ms
Wait time for CTS=ON by part‐
ner after RTS=ON has been set
Value range:
0 ≤ maxWaitTime ≤ 655350 ms
Transfers I/O inputs of the serial
interface module to FB
Prepared data of the FB for the I/
O outputs of the serial interface
module
2)
Request completed without er‐
rors
Actions performed by Actions per‐
user formed by
Checked
Entered Checked
Entered Checked
Entered Checked
I/O variable of the I/O Checked
inputs of the serial
module transferred
to the FB
Checked and en‐ Entered
tered on the I/O vari‐
able for the I/O out‐
puts
Checked Entered
block
35