Advertisement
Quick Links
575/576 Quick Start Guide
This guide helps you install and use your 575/576 for the first time.
Go to
firmware upgrades are available.
Scan for full manual
Step 1: Check what's in the box
575 2-Wire Extra Range HD Transmitter /
576 2-Wire Extra Range HD Receiver
Step 2: Get to know your 575/576
575 2-Wire Extra Range HD Transmitter
#
Feature
1
RESET Recessed Button
2
BAUD RATE DIP-switches
3
ON LED
4
LOOP OUT HDMI Connector
5
HDMI IN Connector
6
TO 576 (RX)
CAT 5/6 RJ-45 Port
7
(Connect via
HD15 15-pin HD Connector
one of these
8
A, B 2-pin TERMINAL BLOCK
options)
Connector
9
RS-232 9-pin D-sub Connector
10 5V DC
575, 576 Quick Start (P/N: 2900-301037QS REV 3)
www.kramerav.com/downloads/575-576
Power adapter
Quick start guide
Function
Press to reset the device.
Set the RS-232 baud rate (baud rate on 575 and 576 should be identical).
Lights green when the device is powered.
Connect to a local monitor.
Connect to an HDMI source.
Connect to the RJ-45 port on 576.
Connect to the 15-pin HD connector on 576.
Connect to the 2-pin terminal block connectors on 576.
Bi-directional RS-232 between the devices, allowing control of the display
from the source end/control of a source from the display end.
+5V DC connector for powering the unit.
to download the latest user manual and check if
P/N:
2 9 0 0 - 3 0 1 0 3 7 QS
Bracket set
Rubber feet
Rev: 3
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Kramer 575
Summary of Contents for Kramer 575
- Page 1 Function RESET Recessed Button Press to reset the device. BAUD RATE DIP-switches Set the RS-232 baud rate (baud rate on 575 and 576 should be identical). ON LED Lights green when the device is powered. LOOP OUT HDMI Connector Connect to a local monitor.
- Page 2 Function RESET Recessed Button Press to reset the device. BAUD RATE DIP-switches Set the baud rate (baud rate on 575 and 576 should be identical). ON LED Lights green when the device is powered. FROM 575 (TX) CAT 5/6 RJ-45 Port Connect to the RJ-45 port on 575.
- Page 3 Step 4: Connect the inputs and outputs Always switch OFF the power on each device before connecting it to your 575/576 devices. For best results, we recommend that you always use Kramer high-performance cables to connect AV equipment to 575/576.
- Page 4 Technical Specifications Inputs 1 HDMI On a female HDMI connector Outputs 1 LOOP HDMI On a female HDMI connector CAT 5/6 On an RJ-45 connector On a 15-pin HD connector 2-wire On a 2-pin terminal block connector Ports RS-232 On 9-pin D-sub connector for serial link extension Inputs CAT 5/6 On an RJ-45 connector...
Need help?
Do you have a question about the 575 and is the answer not in the manual?
Questions and answers