Product Installation; Installation On Wall - imilab EC2 User Manual

Product Installation

With in the coverage of gateway signal, IMILAB EC2 Wireless
Home Security Camera can be installed indoor using wall
accessories or outdoor, without power socket. Place gateway
nearby router, distance between camera and gateway should
be 1~15 meters (no shelter or interference).

Installation on wall

1. Drill two holes on the wall by using the bracket gasket of the
camera as a template. It is recommended that you mark the
locations of the holes with a pencil before drilling. The diameter
of each hole is approximately 0.6cm, and the depth is
approximately 2.5cm.
EN-03