Ranger design C30-DL Installation Manual page 8

Straight partition sprinter partition ( swing door, steel )

2.2.2 Attaching plusnuts.

NOTE: Check if the holes of the partition align with the holes of the van.

For technical support, contact us at 1-800-565-5321

Enlarge all the holes in the van that are aligned with the holes

of the partiton using 3/8" drill bit or step drill.

NOTE: Make new holes in the van if the holes are not aligned with the

holes of the partition.

TOOLS

q Cordless Drill

q 3/8" Drill Bit or Step Drill

Attach plusnuts in the holes.

TOOLS

q Plusnut Tool

HARDWARE USED

17×

# 94-130

Plusnut .250

C30-DL Installation Guide | REV. D2 | Page 8

Table of Contents