Ranger design C30-DL Installation Manual page 5

Straight partition sprinter partition ( swing door, steel )

PHASE 1 – ASSEMBLY

1.2 PARTITION ASSEMBLY

1.2.1 • Remove all the PVC from all the parts, then attach the edge trims on these locations.

• Attach the grab handle to the passenger side panel.

1.2.2 Attach 5" foam tapes on the top, center and bottom of the door panel.

For technical support, contact us at 1-800-565-5321

EDGE TRIMS

TOOLS

q Cordless Impact

q Mallet

HARDWARE USED

2×

q 3/16" Driver Bit

q Cutter

#90-893 Cap Screw 1/4" × 3/4"

#94-112 Serrated Nut

TOOLS

q Cutter

C30-DL Installation Guide | REV. D2 | Page 5

Table of Contents