Ranger design C30-DL Installation Manual page 7

Straight partition sprinter partition ( swing door, steel )

PHASE 2 – INSTALLATION

2.2 VEHICLE PREPARATION

2.2.1 Preparation.

Lift the driver side panel w/ swing door and passenger side panel

inside the van, put the panels in place, then attach the top bracket

on the driver and passenger side panels.

For technical support, contact us at 1-800-565-5321

TOOLS

q Cordless Impact

q 1/2" Socket

HARDWARE USED

4×

#90-200 Hex Bolt 5/16" × 1/2"

#98-116 Flat Washer

#94-116 Serrated Nut

C30-DL Installation Guide | REV. D2 | Page 7

Table of Contents