Table of Contents
Advertisement
● Printing is not clear.
● The printer won't print clearly.
● The printing is too faint.
Probable Cause
There is dirt, dust or other
soiling on the printer head
and rubber roller.
The tape cartridge is not
loaded correctly.
The AC adaptor used is not
the specified AC adaptor.
The batteries used are
depleted or are not the
specified type.
There is wrinkling due to
slack in the ink ribbon.
The print density is wrong.
● Labels aren't printed
● The printer turned off during printing
Probable Cause
The AC adaptor used is not
the specified AC adaptor.
The batteries used are
depleted or are not the
specified type.
● The ink ribbon is fed out of the tape outlet with the tape.
Probable Cause
The tape cartridge was
loaded without tightening
the ink ribbon.
Required Action
Clean the printer head and rubber roller.
(Page
32)
Reload the tape cartridge correctly.
Use the specified AC adaptor or load new batteries
(third party).
Wind the ink ribbon tight and reload the tape cartridge
correctly.
(Page
20)
Adjust the print density in the app.
Required Action
Use the specified AC adaptor or load new batteries
(third party).
Required Action
Remove the tape cartridge. Check that the ink ribbon
is not cut and then wind the ribbon tight. Then reload
it correctly.
(Page
20)
35
(Page
28)
Advertisement
Table of Contents
