First Steps; Switching On/Off; Transmitting Readings - TESTO 115i Instruction Manual

1

First steps

1.1

Switching on/off

1.1.1 Switching on
1. Pull the film out of the battery compartment.
2. Press the button on your Smart Probe.
- The Smart Probe switches on.
1.1.2 Switching off
1. Press and hold the button on your Smart Probe.
- The Smart Probe switches off.
1.2 Establishing Bluetooth
You need a tablet or smartphone with the testo Smart Probes App already installed on it to be able to
establish a Bluetooth connection.
You can get the App for iOS instruments in the App Store or for Android instruments in the Play Store.
Compatibility:

requires iOS 8.3 or later/Android 4.3 or later

requires Bluetooth 4.0

Tested with the following smartphones/tablets:
www.testo.com/smartprobesmanuals.html
✓ The testo App Smart Probe is installed on your terminal device and ready for use.
1. Open the App on your tablet or smartphone by clicking on
2. Press the button on the Smart Probe.
- The Smart Probe switches on and automatically connects with the App. A pairing with the
device is not needed. (Open the app before turning on the Smart Probe!)
- The LED flashes yellow while connecting via Bluetooth and then flashes green once the
connection is established.
- The connection between the Smart Probe and your mobile terminal device is established.
1.3

Transmitting readings

✓ The Smart Probe is switched on and connected to your mobile terminal device via Bluetooth.
- The current readings are automatically displayed in the App.
connection
®