Using The App; Overview Of Operating Controls; Basic Settings - TESTO 115i Instruction Manual

2

Using the App

2.1

Overview of operating controls

7
6
5
4
2.2

Basic settings (

2.2.1 Select Language
1. Tap ->
- A selection list is displayed.
2. Tap the required language.
- The selected language receives a green check mark.
3. Tap ◄ several times until the measurement view is displayed.
- The language has been changed.
2.2.2 Display Tutorial
The Tutorial
1. Tap ->
- The Tutorial
2. Tap X to close the Tutorial.
2.2.3 Show help
An internet connection is required to display the testo website.
1. Tap ->
- The page
2.2.4 Additional
2.2.4.1 Display testo website
An internet connection is required to display the testo website.
1. Tap ->
- The page
2.2.4.2 Display App Info
In App Info you can find the version number of the installed App.
1. Tap ->
- The App's version number is displayed, as well as the ID.
2. Tap ◄ several times until the basic view is displayed again.
1
1 Basic settings (language, tutorial etc.)
2 Export your measurements (Reporting)
3 Restarts the measuring value recording in graph and table
format.
4 Measurement settings (menu changes depending on the
connected Smart Probe and the selected application)
5 Switch between the views (list, graph, table view)
6 Display of connected Smart Probes.
7 Application settings
2
3
)
Settings -> Language.
guides you through the first steps when operating with the testo Smart Probes App.
Tutorial
is displayed. In Tutorial, swipe to display the next page.
Help
www.testo.com/smartprobesmanuals.html
information
About/Link -> Testo
www.testo-international.com
About/Link -> Info
is displayed.
is displayed.