TESTO 115i Instruction Manual page 11

Select "Temperature (IR)"
2.9.5
Smart Probe: t805i
Select "Mould Indication"
2.9.6
Smart Probe: t805i
Optional Smart Probes: t605i
1. Press
2. Select Configure measurement

Select ambient temperature/ humidity to calculate the relative surface moisture (%RH wall)

Choose between measuring ambient conditions automatically with a t605i or enter them
manually
 Relative surface moisture is calculated by the surface and ambient temperature as well
as by the humidity.
3. Select set emissivity
4. Red/ Yellow/ Green bar indicates the mould risk
 Values are displayed on top of the screen
5. Press
6. Press
1. Press
2. Select set emissivity

Choose between pre-configured default emissivities or put
them in manually
3. Press the button of t805i to start the measurement
4. Take a picture of the multi-point laser circle on the measured
application

see "2.5 Settings view"
and select Edit view
 See "Temperature (IR)"
to deactivate the camera
to take a photo and to activate/ deactivate flash

see "2.5 Settings view"
and select Edit view