TESTO 115i Instruction Manual page 12

Select "Tightness Test"
2.9.7
Smart Probe: t510i
2.9.8 Cooling/ Heating Power
Needed Smart Probes: 2x t605i
1. Press and select Edit view
2. Press and select configure measurement

Select the maximum allowed pressure drop, stabilisation time,
test time and vibration alarm
3. Select Pressure setting
4. Select Zero pressure sensor
5. Above the graph the following data is displayed:

Pressure at the start of the measurement

Current pressure

Delta between actual measured pressure and reference pressure

Maximum allowed pressure drop
6. Press to start the stabilisation time. As soon as stabilisation
time is over, test time starts. Vibration alarm informs about end of
measurement
 Press
to abort the test
1. Press and select Edit view

Press to select humidity probe t605i for Return air and
Supply air and high-pressure probe
 App automatically calculates enthalpy
2. Press and select Configure measurement

Enter volume flow to calculate BTU/h

Select return air or supply air

see "2.5 Settings view"
 see "AC + Refrigeration"
see "AC + Refrigeration"