Various Models And Terms - Task Force Tips MID-FORCE Instructions For Safe Operation And Maintenance

2.1 VARIOUS MODELS AND TERMS

SERIES
MID-FORCE
MID-FORCE
DUAL-FORCE
DUAL-FORCE
CAFS-FORCE1
CAFS-FORCE2
* Other threads, coupling sizes, or connector styles can be specifi ed at time of order.
Nozzle must be mated to a hose line with matched threads. Mismatched or damaged threads may
WARNING
cause nozzle to leak or uncouple from hose under pressure and could cause injury.
COUPLING
RUBBER
GASKET
PISTOL
GRIP
DETENTS
GASKET
GRABBER
INLET
SCREEN
MID-FORCE and
DUAL-FORCE only
©Copyright Task Force Tips, Inc. 2002 - 2011
FLOW RANGE
GPM L/min
70-200 265-760
70-200 265-760
95-300 360-1150
95-300 360-1150
70-200 265-760
95-250 360-950
ON OFF
NOZZLE WITH VALVE
a nd INTEGRAL PISTOL GRIP
VALVE HANDLE
NOZZLE WITH VALVE
FIGURE 1 COMMON MODELS AND TERMS
NOMINAL PRESSURE
PSI BAR
100 7
75 5
100 7
75 5
75 5
75 5
STREAM
SHAPER
TIP ONLY NOZZLE
VALVE POSITION
LABEL
4
STANDARD COUPLING*
1-1/2 NH
1-1/2 NH
1-1/2 NH
1-1/2 NH
1-1/2 NH
1-1/2 NH
BARREL LABEL
NAME LABEL
PRESSURE
CONTROL
KNOB
VALVE RING
TIP ONLY NOZZLE
WITH TWIST SHUTOFF
LIN-035 March 28, 2011 Rev14