Task Force Tips MASTERSTREAM Series Instructions For Installation, Safe Operation And Maintenance
Nozzle
Hide thumbs
Also See for MASTERSTREAM Series:
Table of Contents
Advertisement
Quick Links
INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE
WARNING
MASTERSTREAM 1000
150 - 1000 GPM @ 100 PSI
600 - 4000 LPM @ 7 BAR (700 KPA)
MASTERSTREAM 1250
300 - 1250 GPM @ 70 - 120 PSI
1100 - 4700 LPM @ 4.8 - 8.3 BAR (480 - 830 KPA)
MASTERSTREAM 2000
300 - 2000 GPM @ 80 - 120 PSI
1100 - 7600 LPM @ 5.3 - 8.3 BAR (550 - 830 KPA)
TASK FORCE TIPS, INC.
MADE IN USA • www.tft.com
©Copyright Task Force Tips, Inc. 1999 - 2011
MANUAL:
Masterstream Nozzle Series
Read instruction manual before use. Operation of this device without understanding the
manual and receiving proper training is a misuse of this equipment. A person who has not
read and understood all operating and safety instructions is not qualifi ed to operate any of the
Masterstream Series Nozzles.
This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the
operation, servicing and safety procedures associated with the Masterstream Series fi refi ghting
nozzles.
This manual should be kept available to all operating and maintenance personnel.
MASTERSTREAM 1250S
150 - 1250 GPM @ 100 PSI
600 - 4500 LPM @ 7 BAR (700 KPA)
MASTERSTREAM 1500
300 - 1500 GPM @ 70 - 120 PSI
1100 - 5700 LPM @ 4.8 - 8.3 BAR (480 - 830 KPA)
MASTERSTREAM 4000
600 - 4000 GPM @ 80 - 120 PSI
2300 - 15000 LPM @ 5.5 - 8.3 BAR (550 - 830 KPA)
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219- 462-6161 • Fax 219-464-7155
LIM-030 April 29, 2011 Rev13
Advertisement
Table of Contents
Related Manuals for Task Force Tips MASTERSTREAM Series
Summary of Contents for Task Force Tips MASTERSTREAM Series
- Page 1 Masterstream Series Nozzles. This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the operation, servicing and safety procedures associated with the Masterstream Series fi refi ghting nozzles. This manual should be kept available to all operating and maintenance personnel.
-
Page 2: Table Of Contents
6. Failure to follow these guidelines may result in death, burns or other severe injury. Fire and Emergency Manufacturers and Service Association FEMSA P.O. Box 147, Lynnfi eld, MA 01940 • www.FEMSA.org ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13... -
Page 3: Meaning Of Safety Signal Words
2.0 GENERAL INFORMATION The Task Force Tips Masterstream Series Nozzles automatic nozzles operate by sensing the pressure at the nozzle’s inlet and adjusting the discharge opening to maintain a constant pressure throughout the fl ow range of the nozzle. While fl owing, the stream pattern can be varied from wide fog to straight stream. - Page 4 1 Electrostatic Hazards of Foam Blanketing Operations by Peter Howels. Industrial Fire Safety July/August 1993 2 The Fire Fighter and Electrical Equipment, The University of Michigan Extension Service, Fourth Printing 1983. Page 47. ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
-
Page 5: Use With Salt Water
Fig 1E Stream Shaper moved Fig 1F Stream Shaper moved remotely by electricity (12-24 volts) by linear (push/pull) motion from user’s mechanism FIG 1 - Methods for Moving Stream Shaper ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13... -
Page 6: Hydraulic Installation
2.6 USE WITH FOAM The Masterstream Series nozzles may be used with foam solutions. Refer to fi re service training for the proper use of foam. For Class B fi res, lack of foam or interruption in the foam stream can cause a break in the foam WARNING blanket and greatly increase the risk of injury or death. -
Page 7: Foamjet Lx With Masterstream 1000 & 1250S Nozzle
2.6.1 FOAMJET LX WITH MASTERSTREAM 1000 & 1250s NOZZLE To increase the expansion ratio, Task Force Tips “Foamjet LX” (model FJ-LX-M) may be used with the Masterstream 1000 and 1250s nozzles. This low expansion foam tube attaches and detaches quickly from the nozzle. Adjust nozzle spray pattern to give best foam quality. - Page 8 FIG 3A - Masterstream 1000 Pressure Performance MASTERSTREAM 1250s PERFORMANCE FLOW (L/MIN) 2000 4000 6000 OPERATING ENVELOPE PER NFPA 1964 1000 1200 1400 1600 FLOW (GPM) FIG 3B - Masterstream 1250s Pressure Performance ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
- Page 9 90 PSI SETTING 80 PSI SETTING 5 BAR 70 PSI SETTING FLOW RANGE 1000 1200 1400 1600 FLOW (GPM) 1800 2000 FIG 3D - Masterstream 1500 Pressure Performance ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
- Page 10 100 PSI SETTING 90 PSI SETTING 6 BAR 80 PSI SETTING FLOW RANGE 1000 2000 3000 4000 5000 FLOW (GPM) 6000 FIG 3F - Masterstream 4000 Pressure Performance ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
- Page 11 7 turns 900 1000 1100 1200 1300 1400 NOZZLE FLOW (GPM) Fig 3.3 Nozzle fl ow vs baffl e turns from closed position for Masterstream Fixed Nozzles ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
-
Page 12: Determining Flow With Pre-Piped Monitors
3.5 STREAM TRAJECTORY DATA Figures 4A - 4E give the stream trajectory for the Masterstream Series nozzles at various fl ows. Notes on trajectory graphs: • Graphs show approximate effective stream trajectory at 30 degrees elevation in no wind conditions. Distance to last water drops approximately 10% farther. - Page 13 MASTERSTREAM 1250, 120 PSI (8.3 BAR, 830 KPA) HORIZONTAL DISTANCE (FEET) CURVE FLOW REACTION CURVE FLOW REACTION 1100 1900 3000 1000 3800 1250 4700 FIG 4B - Masterstream 1250 Stream Trajectory ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
- Page 14 MASTERSTREAM 1500, 120 PSI (8.3 BAR, 830 KPA) HORIZONTAL DISTANCE (FEET) CURVE FLOW REACTION CURVE FLOW REACTION 1100 2300 1000 3800 1250 4700 1500 5700 FIG 4C - Masterstream 1500 Stream Trajectory ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
- Page 15 MASTERSTREAM 2000, 120 PSI (8.3 BAR, 830 KPA) HORIZONTAL DISTANCE (FEET) CURVE FLOW REACTION CURVE FLOW REACTION 1100 2300 1000 3800 1500 5700 2000 1110 7500 FIG 4D - Masterstream 2000 Stream Trajectory ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
- Page 16 HORIZONTAL DISTANCE (FEET) CURVE FLOW REACTION CURVE FLOW REACTION 2300 1000 3800 2000 1200 7600 3000 1700 11000 4000 2300 15000 1000 FIG 4E - Masterstream 4000 Trajectory ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
-
Page 17: Flushing Debris
fl ow. In the event of a blockage, it may be necessary to retreat to a safe area. PISTON PUSH ROD SPRAY LUBE SHAFT LUBE RETURN SPRING CYLINDER LUBE LUBE FIG 5A - Masterstream 1000 and 1250s Front End Parts ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13... - Page 18 FIG 5B - Masterstream 1250 and 1500 Front End Parts LUBE LUBE LUBE CONTROL POPPET SPRING SHAFT RETURN SPRING LUBE CYLINDER PISTON FIG 5C - Masterstream 2000 Nozzle Front End Parts ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
- Page 19 LUBE LUBE LUBE RETURN SPRING POPPET SHAFT CONTROL SPRING LUBE PISTON CYLINDER FIG 5D - Masterstream 4000 Nozzle Front End Parts ©Copyright Task Force Tips, Inc. 1999 - 2011 LIM-030 April 29, 2011 Rev13...
-
Page 20: Maintenance
Task Force Tips, Inc., 3701 Innovation Way, Valparaiso, IN 46383-9327 USA (“TFT”) warrants to the original purchaser of its Masterstream Series nozzles (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in material and workmanship during the fi...