Loading The Multipurpose Feeder; Setting The Paper Size And Type - Lexmark B3340dw Quick Reference

5 Insert the tray.
If necessary, set the paper size and paper type from the control
panel to match the paper loaded.

Loading the multipurpose feeder

1
Open the multipurpose feeder.
2
Flex, fan, and align the paper edges before loading.
3
Load paper with the printable side faceup.
Notes:
•
Load letterhead faceup with the header toward the rear
of the printer for one ‑ sided printing.
•
Load letterhead facedown with the header toward the
front of the printer for two ‑ sided printing.
•
Load envelopes with the flap facedown on the left side.
4
Warning—Potential Damage: Do not use envelopes with
stamps, clasps, snaps, windows, coated linings, or self ‑ stick
adhesives.
4
Adjust the guide to match the size of the paper that you are
loading.
5 From the control panel, set the paper size and paper type to
match the paper loaded.

Setting the paper size and type

1 From the control panel, navigate to:
Settings > > Paper > > Tray Configuration >
> Paper Size/Type > > select a paper source
2
Set the paper size and type.
Connecting a mobile device to the
printer
Note: This feature is available only in some printer models.
Before connecting your mobile device, make sure to do the
following:
Enable Wi ‑ Fi Direct in the printer. From the control panel,
•
navigate to:
Settings > > Network/Ports >
> Enable Wi ‑ Fi Direct >
> On >
View the Wi ‑ Fi Direct SSID. From the control panel, navigate
•
to:
> Wireless >