Advertisement
Available languages
Available languages
due to an obstruction. If this occurs, stop the engine, disconnect ignition cable
and remove the obstruction.
4. MAINTENANCE
Your Hedge trimmer is designed to provide many hours of trouble free service.
Regular scheduled maintenance will help your hedge trimmer achieve that goal. If you
are unsure or are not equipped with the necessary tools, you may want to take your
hedge trimmer to the address on the warranty card for maintenance. To help you
decide whether you want to Do-It-Yourself or have the address on the warranty card do
it, each maintenance task has been graded. If task is not listed, see the address on the
warranty card for repairs.
Skill levels
Level 1 = Easy to do. Most required tools come with hedge trimmer.
Level 2 = Moderate difficulty. Some specialized tools may be required.
Level 3 = Experience required. Specialized tools are required. We recommends that
the hedge trimmer be returned to the address on the warranty card for service.
We offers Maintenance kits and parts to make your maintenance job easier. Just below
each task heading are listed the various part numbers required for that task. See the
address on the warranty card for these parts.
Fuel filter (Level 1)
Fig. 11 + 12
Tools required:
1 Length of wire with one end bent into a hook, 200-250 mm (8-10")
1 Clean rag
1 Funnel
1 A approved fuel container
Parts required:
1 Air & fuel filter kit
Warning! Fuel is very flammable. Use extreme care when mixing, storing or
handling.
● Use a clean rag to remove loose dirt from around fuel cap and empty fuel tank.
● Use the fuel line hook to pull the fuel line and filter from the tank.
● Remove the filter from the line and install the new filter.
Spark plug (Level 2)
Fig. 13 + 14
Tools required:
1 T-wrench
1 Feeler gauge
1 Soft metal brush
49
Advertisement
