Subwoofer - Pioneer ELITE VSX-LX305 Instruction Manual

Hide thumbs Also See for ELITE VSX-LX305:
Table of Contents

Advertisement

Manual MCACC
Height 1 Left, Height 1 Right, Height 2 Left, Height 2 Right, Surr Back
Right, Surr Back Left:
After selecting the speaker frequency from between "63 Hz" and "16 kHz" with
the cursors
/ , adjust the volume of that frequency between "-12.0 dB" and
"+12.0 dB" with
/ . To readjust the overall volume balance with "Trim", select
"Trim" in
/ , and use
/
to adjust the volume.
• If "OVER!" is displayed during adjustment, the volume of the frequency band
or another frequency band is too high, so reduce the volume of the frequency
bands until the display disappears.
• "63 Hz" can only be selected when this speaker is set to "Large" in "System
Setup" - "Speaker" - "Crossover".
• Depending on the use of the ZONE speakers, it may not be possible to select
this setting.
• If an item cannot be selected even though connection is correct, check
that the settings in "System Setup" - "Speaker" - "Configuration" - "Speaker
Channels" matches the number of connected channels.

Subwoofer:

After selecting the speaker frequency from between "31 Hz" and "250 Hz" with
the cursors
/ , adjust the volume of that frequency between "-12.0 dB" and
"+12.0 dB" with
/ . To readjust the overall volume balance with "Trim", select
"Trim" in
/ , and use
/
to adjust the volume.
• If "OVER!" is displayed during adjustment, the volume of the frequency band
or another frequency band is too high, so reduce the volume of the frequency
bands until the display disappears.
• This cannot be selected if "No" is set in "System Setup" - "Speaker" -
"Configuration" - "Subwoofer".
Setup
137

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents