When The Unit Is Operating Erratically; Try Restarting The Unit; Resetting The Unit - Pioneer ELITE VSX-LX305 Instruction Manual

When the unit is operating erratically

‰ Try restarting the unit
Restarting this unit may solve the problem. Set the main unit to standby, then
after waiting for 5 seconds or more, press and hold the
of the main unit for at least 5 seconds, and then restart the unit. (The settings
on this unit are kept.) If the problem persists after restarting the unit, unplug and
plug the power cords or HDMI cable of this unit and connected devices.
‰ Resetting the unit (this resets the unit settings to the
default)
STANDBY/ON button
If the restart of the unit does not solve the problem, reset the unit, and restore
all the settings to the factory default at the time of purchase. This may solve
the problem. If the unit is reset, your settings are restored to the default values.
Be sure to note down your setting contents before performing the following
operations. Note that it is not possible to reset the unit during the Initial Setup
process. Before doing the following procedures, press
1. While pressing and holding ZONE CONTROL on the main unit with the unit
turned on, press the
2. "Clear" is displayed on the display, and the unit returns to the standby state.
Do not remove the power cord until "Clear" disappears from the display.
To reset the remote controller, while pressing and holding MODE, press the
CLEAR button at least 3 seconds.
STANDBY/ON button.
2
Troubleshooting
to exit Initial Setup.
1
159