Star Trac 4-UB Assembly Manual page 9

9. Unpack the console, console mounting
screws, and console install wiring
instructions (620-8657) from the
console box.
10. Set the lower rear panel (020-7958) into
place on the mast, then install the back
console shroud (701-0344-XX).
11. Use a #2 phillips screwdriver and attach
the back shroud of the console to the
console mount using eight (8) pieces
each of the of the #8-18 x 3/4" pan
head screw (110-3402) and M4 flat
washer (120-3307).
12. Use a #2 phillips screwdriver to secure
the back shroud to the rear panel using
four (4) of the #8-18 x 3/8" pan head
screws (731-0584).
Page 8
Fig. 11
Fig. 12
Fig. 13