Star Trac 4-UB Assembly Manual page 10

13. Plug the three cables from Fig. 15 into
the console as indicated in Fig. 16.
Note: Lines E & F indicate the wiring
path from the board to the rear console
jacks.
14. After connecting the console to the
base, use a #2 phillips screwdriver to
secure the console front to the rear
shroud using six (6) of the 8-18 x 3/4"
pan head screws.
C
(Red/Black)
A
Fig. 14 Wiring from Neck of Unit
F
E
B
Fig. 15 Console Connections (TR Frame Shown)
Fig. 16
D
B
(Green/White)
Page 9
D
A
C