Qilive Q.6364 User Manual page 15

1. Set the thermostat to "0" position to switch the appliance off
( Fig. 15).
2. Unplug the appliance to make sure the appliance is disconnected
from mains power supply.
3. Remove the screw of the lamp cover ( Fig. 19).
4. Remove the lamp cover.
5. Unscrew the lamp.
6. Fit the new lamp and replace the lamp cover and screw.
7. Reconnect the appliance to mains power supply and set the
thermostat again.
6.4 Transportation
Caution! Do not place the appliance upside down or
sideways. During transportation, the appliance inclination
must not exceed 45°.
• Do not lift the appliance by holding the top edges of the appliance.
Hold the appliance by its base or sides.
• Before moving the appliance, remove all food and secure the
components properly.
• Tape the door to secure them.
• Tape the power cord to the side of the appliance to prevent
damage during transportation.
6.5 Storage
• If the appliance is not used for an extended period, unplug it
from the power supply, remove all food and clean the appliance.
• During storage, leave the door slightly open to prevent the
formation of unpleasant odours.
15
EN