SET UP INSTRUCTIONS
Place the Stamina® Magnetic Recumbent Exercise Bike 845 in the area where it will be used. It is
recommended that the Stamina® Magnetic Recumbent Exercise Bike 845 be placed on an equipment
mat. The Stamina® Magnetic Recumbent Exercise Bike 845 is approximately 51.1 inches long (max.)
x 23.6 inches wide x 46.3 inches tall. (These dimensions may vary up to one inch.) An area 4 feet wide
x 7 feet long is required for safe operation of the Stamina® Magnetic Recumbent Exercise Bike 845.
Make sure that adequate space is available for access to and passage around the Stamina® Magnetic
Recumbent Exercise Bike 845.
LEVELING: Adjust the LEVELING CAPS(84) on the REAR STABILIZER(13) so that the Stamina®
Magnetic Recumbent Exercise Bike 845 sits on the fl oor without rocking.
MOVING: The Stamina® Magnetic Recumbent Exercise Bike 845 has a pair of Wheels in the
WHEEL CAPS(77) on the FRONT STABILIZER(11). Lift up the REAR STABILIZER(13) to
move the Stamina® Magnetic Recumbent Exercise Bike 845.
FUNCTION INSPECTION:
Visually inspect the Stamina® Magnetic Recumbent Exercise Bike 845 to verify that assembly is as
shown in the above illustration. Check the function of the Stamina® Magnetic Recumbent Exercise
Bike 845 by turning the crank slowly through one complete revolution to verify that the drive train
functions properly.
CAUTION: Locate and read the CAUTION LABEL(114) on the Stamina® Magnetic Recumbent
Exercise Bike 845. Make sure that all users read the CAUTION LABEL(114) before using
the product.
Equipment Mat
(not included)
13