Set Up Instructions - Stamina 15-0336A Owner's Manual

SET UP INSTRUCTIONS

Place the Stamina® Wonder Exercise Bike in the area where it will be used. It is recommended that the
Stamina® Wonder Exercise Bike be placed on an equipment mat. The maximum operation dimensions
of the Stamina® Wonder Exercise Bike are approximately 41.8 inches long x 50.2 inches wide x 53.5
inches tall. (These dimensions may vary up to one inch.) An area 6 feet wide x 6 feet long is required for
safe operation of the Stamina® Wonder Exercise Bike. Make sure that adequate space is available for
access to and passage around the Stamina® Wonder Exercise Bike.
LEVELING: Adjust the LEVELING CAPS(80) on the REAR STABILIZER(106) at the back so that the
Stamina® Wonder Exercise Bike sits on the floor without rocking.
MOVING: The Stamina® Wonder Exercise Bike has a pair of MOVING WHEELS(101) on the REAR
STABILIZER(106). Lift up the FRONT STABILIZER(7) to move the Stamina® Wonder
Exercise Bike.
FUNCTION INSPECTION:
Visually inspect the Stamina® Wonder Exercise Bike to verify that assembly is as shown in the above
illustration. Check the function of the Stamina® Wonder Exercise Bike by turning the crank slowly
through one complete revolution to verify that the drive train functions properly. Adjust the TENSION
KNOB(30) and verify that it functions properly and the resistance changes.
CAUTION: Locate and read the CAUTION LABEL(83) on the Stamina® Wonder Exercise Bike. Make
sure that all users read the CAUTION LABEL(83) before using the product.
12
Equipment Mat
(not included)