5.2.10 Setting up the Packet Filter
The Packet Filter feature can be used to prohibit transmission and reception of
data which may cause abnormal operation.
The following restrictions can be implemented using the Packet Filter settings:
To configure the Packet Filter settings, follow these steps:
1 Open the Basic Settings screen. For instructions on how to do this, see
2 Click Packet Filter on the Advanced Settings menu in the left panel.
Figure 49: Packet Filter Setup screen
3 Select the setting you want to make from the Filter Setting drop-down list.
4 A confirmation screen is displayed, indicating your rule has been added.
55 Configuring AirStation Settings
WLA-AWCG User Manual
Prohibit configuration from a Wireless LAN.
Prohibit configuration from a Wired LAN.
Prohibit configuration over AirStation.
"Displaying the Settings screen" on page 43.
The Packet Filter Setup screen is displayed.
Click Add the Rule.